Eagle Extreme Smidde Råder RB25 / RB26 - CRS4783NXD

Nissan Skyline GTST & GTR RB25DET / RB26DETT

12.001,- (eks. mva)

15.002,-

Ikke medlem pris: 15.002,-

SKU: CRS4783NXD

På fjernlager 2-5 virkedager leveringstid

*Enkelte rabatter gjelder ikke

Produktinformasjon
Mål

Rated to 1300hp!

Free your engine's horsepower on the wings of Eagle H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models—and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts, or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included.

Quantity:Sold as a set of 6.

Connecting Rod Length Center to Center (in):4.783 in.

Connecting Rod Beam Style:H-beam

Connecting Rod Material:Forged 4340 steel

Connecting Rod Finish:Shot-peened

Wrist Pin Style:Floating

Rod Journal Diameter (in):1.889 in.

Big End Bore Diameter (in):2.0070 in.

Big End Width (in):0.858 in.

Pin End Bore Diameter:0.826 in.

Pin End Width (in):0.858 in.

Clearanced for Stroker:Yes